ROOF PANEL SELECTION

Enter parameters and calculate deflection. Select Panel thickness (depth), face thickness, loading, span and pitch. Results output below.









Input roof panel loading from options 
● 80kg/m² - Lightweight e.g. standing seam/membrane
● 120kg/m² - Medium: slate tiles
● 140kg/m² - Heavy: clay/concrete tiles/40mm sedum
● 225kg/m² - Green Roof system & 18mm MDP Ply

Live or imposed load for roofs is not added for this long term loading check. For OSB SIP panels on roofs the short term strength is generally not an issue, except in areas with high snow load. Or roofs with access for maintenance may need higher live loads to be considered. This would need checks by a structural engineer.


Span is the horizontal distance between supports. A long span is 4m or more.




Pitch is the roof angle to the horizontal.
(e.g 0° is flat, 15-30° is low pitch and 45-60° is steep pitch)




Summary of Input
mm
SINGLE SPAN Deflection

mm
TWO SPAN or MULTIPLE SPAN Deflection

mm
REINFORCED SINGLE SPAN Deflection (Reinforced with solid timber splines in joints)

mm
REINFORCED TWO/MULTIPLE SPAN
(Two Span or Multiple Span & Reinforced with solid timber splines in joints)